This Is AuburnAUrora

Show simple item record

Reinforced ply-wood web spars (airplane section, S. & A. branch)


Metadata FieldValueLanguage
dc.creatorUnited States. Army. Air Service. Engineering Division.en_US
dc.date.accessioned2018-08-10T15:37:13Z
dc.date.available2018-08-10T15:37:13Z
dc.date.created1922-03-15en_US
dc.identifier.urihttp://hdl.handle.net/11200/49229
dc.descriptionThe success of reinforced ply-wood construction in the design of large ribs suggested its application to the construction of large spars such as are used in internally braced construction with thick wing sections. The following development work was conducted to determine the adaptability of reinforced ply-wood web construction to spars, and also to compare the relative merits of the solid-web and trussed-web types. Two series of designs and tests were made on each type of construction. The first test emphasized the necessity of certain design features and the necessity of securing good gluing. The second series of designs incorporated the results of our experience with the first series of designs and is thought to provide an excellent basis of comparison between the solid-web and trussed-web construction.en_US
dc.formatPDFen_US
dc.publisherWashington, D.C. : Chief of Air Serviceen_US
dc.relation.ispartofseriesAir Service information circular (Aviation) ; v. 4, no. 313en_US
dc.relation.ispartofseriesMcCook Field report ; Serial no. 1737en_US
dc.subjectAeronautics--Systems engineeringen_US
dc.subjectAirplanes--Design and constructionen_US
dc.subjectAirplanes--Parts--Testingen_US
dc.subjectPlywood--Testingen_US
dc.titleReinforced ply-wood web spars (airplane section, S. & A. branch)en_US
dc.typeTexten_US

Files in this item

This item appears in the following Collection(s)

Show simple item record