This Is AuburnAUrora

Show simple item record

Experimental reinforced plywood truss ribs (airplane section, S. & A. branch report)

Metadata FieldValueLanguage
dc.creatorUnited States. Army. Air Service. Engineering Division.en_US
dc.descriptionThe purpose of this report is to summarize the work that has been done on the development of reinforced plywood truss ribs, comparing this type of rib with other types, and drawing conclusions from the test results in regard to data to be used in further design work. The problem primarily has been to develop large ribs which should possess the following characteristics: 1. Adequate strength. 2. Minimum weight. 3. Low production cost. 4. Simplicity of construction. 5. Rigidity. 6. Reliability. 7. Economy of material.en_US
dc.publisherWashington, D.C. : Chief of Air Serviceen_US
dc.relation.ispartofseriesAir Service information circular (Aviation) ; v. 3, no. 212en_US
dc.relation.ispartofseriesMcCook Field report ; Serial no. 1483en_US
dc.subjectAirplanes--Design and constructionen_US
dc.subjectAeronautics--Systems engineeringen_US
dc.subjectStrains and stressesen_US
dc.titleExperimental reinforced plywood truss ribs (airplane section, S. & A. branch report)en_US

Files in this item

This item appears in the following Collection(s)

Show simple item record