This Is AuburnAUrora

Show simple item record

Investigation of the compressive strength properties of stainless steel sheet-stringer combinations. Part II (aircraft branch report)


Metadata FieldValueLanguage
dc.creatorSchwartz, E. H.en_US
dc.date.accessioned2017-10-06T14:52:42Z
dc.date.available2017-10-06T14:52:42Z
dc.date.created1936-12-15en_US
dc.identifier.urihttp://hdl.handle.net/11200/49027
dc.descriptionThe object of this report is to determine the effect of the test data of the replaced specimens on the original data as reported in Air Corps Technical Report Serial No. 4010, as well as to fill in the missing data of the original specimens due to premature failure of these specimens by spot-weld failures. The quality of the spot-welds of the specimens contained in this report was greatly improved over that of the original specimens reported in the previous report.en_US
dc.formatPDFen_US
dc.publisherWashington, D.C. : Chief of Air Corpsen_US
dc.relation.ispartofseriesAir Corps information circular (Aviation) ; v. 8, no. 705en_US
dc.relation.ispartofseriesAir Corps technical report ; Serial no. 4096en_US
dc.subjectStrength of materialsen_US
dc.subjectSteel--Testingen_US
dc.subjectSteel--Weldingen_US
dc.subjectStrains and stressesen_US
dc.subjectAirplanes--Design and constructionen_US
dc.subjectAirplanes--Weldingen_US
dc.subjectWelded joints--Testingen_US
dc.subjectMetal-worken_US
dc.titleInvestigation of the compressive strength properties of stainless steel sheet-stringer combinations. Part II (aircraft branch report)en_US
dc.typeTexten_US

Files in this item

This item appears in the following Collection(s)

Show simple item record