Show simple item record

dc.contributor.authorBasore, Cleburne Ammenen_US
dc.date.accessioned2017-07-01T02:31:08Zen_US
dc.date.available2017-07-01T02:31:08Zen_US
dc.date.issued1937-10en_US
dc.identifier.urihttp://hdl.handle.net/11200/48857
dc.descriptionBibliography: p. 23.en_US
dc.description.abstractThe object of this investigation is to call attention to the presence of the Alabama lignite and, if possible, to find a method for the profitable utilization of this material. As a result of this investigation, a process has been developed for the manufacture of a good grade fuel briquette involving the following steps: (1) The raw lignite is air-dried and then preheated or subjected to low temperature distillation at a temperature sufficient to remove practically all the water and much of the volatile matter of the lignite. As a result, the weight is decreased about one third, much of the smoke is eliminated and the heating value of the lignite is appreciably increased. (2) The preheated lignite residue is then ground, moistened with water and briquetted hot without the addition of a binder. The resulting briquettes are firm and strong enough to withstand rough handling, and they resist weathering to an extent which would permit shipment and storage if protected from direct rainfall. (3) The optimum conditions for carrying out the various steps in the process have been determined and a study made of the probable large-scale equipment and cost of manufacture. (4) Judging from the apparent quality of the briquette and the estimated cost of production, the briquettes have considerable promise. Note.-Alabama lignite deposits have not been developed sufficiently for the variation in the lignite from different localities to be determined. Apparently there is considerable variation in Alabama lignite. While the samples employed for this work are believed to be representative of much of the lignite, the process described above is not necessarily applicable to all Alabama lignites. Preliminary briquetting tests should be carried out on an unknown deposit in order to determine if this method is applicable.en_US
dc.publisherAuburn, Ala. : Alabama Polytechnic Institute, Engineering Experiment Stationen_US
dc.relation.ispartofseriesBulletin (Alabama Polytechnic Institute. Engineering Experiment Station) ; no. 8en_US
dc.relation.ispartofseriesBulletin (Alabama Polytechnic Institute) ; v. 33, no. 2.en_US
dc.subjectBriquets (Fuel)en_US
dc.subjectLigniteen_US
dc.titleFuel Briquettes from Alabama Lignite by Destructive Distillation at Low Temperatures and Briquetting the Residue without a Binderen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record